Peavey CEL-2a

Stereo or Dual-Mono Processing!
The CEL-2a Compressor/Expander/Limiter is designed for use in all live performance and recording applications, and can be incorporated as either two independent compressors or one synched stereo compressor with true RMS summing. Voltage-controlled amplifier and RMS-integrated circuits maintain low distortion and excellent noise performance.

Peavey CEL-2 Compressor/Expander/Limiter Features:
• Stereo or dual mono operation
• Switchable low cut filter on each channel
• Switchable de-esser on each channel
• 1/4 inch TRS insert capability
• Fully adjustable compressor/limiter/expander
• Full gain reduction metering
• Input/Output switchable meters

Get Peavey CEL-2 for MYR 1,XXX.00 at ICONS Music

Peavey RX-22 Driver

Peavey RX-22 Driver Specifications:
• Horn Throat Exit Diameter: 1" / 25mm
• Impedance: 8 ohms
• Minimum Impedance: 5.1 ohms
• DC Resistance 4.7 ohms: Frequency Response
• 500 Hz - 20kHz
• RMS Power Rating: 70 Watts above 1kHz Program Power Rating 140 Watts above 1kHz Peak Power Rating 280 Watts above 1kHz
• Lowest Recommended Crossover: 500 Hz @ 12dB/octave
• Recommended Crossover: 1.2kHz @ 12dB/octave
• Sensitivity (SPL): 111dB
• Diaphragm Material” Pure Titanium
• Voice Coil Diameter: 2" / 50.8mm
• Voice Coil Material: Edgewound Copper-Clad Aluminum
• Nominal Efficiency: 30%
• Flux Density: 1.75 Tesla
• Net Weight: 5.0 lbs.

Mounting Informations:
• Overall Diameter: 5.25" / 133.35 mm
• Overall Depth: 3.05" / 77.5mm
• Horn Coupling Diameter: 7/8" / 22.2mm
• Horn Coupling Thread: Standard 1.375"-18

Get it at ICONS Music only for MYR 6XX.00

Peavey RX-14 Compressor Driver

Peavey RX-14 Compression Driver
Titanium diaphragm compression driver w/ 1" throat diameter, Ferrofluid cooled; Frequency response: 1.5 kHz - 20 kHz, Impedance: 8 ohms; Standard threaded screw-on mounting.

Peavey RX 14 Compression Driver Applications:
• Installed Ceiling Sound
• Churches
• Meetings and Board Rooms
• Courtrooms
• Auditoriums
• Lecture Halls
• Convention Centers
• Restaurants
• Retail Facilities
• Malls

Features:
• Titanium diaphragm compression driver with 1" throat diameter, ferrofluid cooled.
• Frequency response: 1.5 Hz - 20 kHz.
• Impedance: 8 Ohms.
• Standard threaded screw-on mounting.
• Weight Unpacked: 2
• Width Unpacked: 3.562
• Depth Unpacked: 2.593
• Height Unpacked: 3.562
• Weight Packed: 2.5
• Width Packed: 3.75
• Depth Packed: 2.875
• Height Packed: 3.75

Grab your now at ICONS Music for only MYR 3XX.00 !

Peavey 44-XT Driver

Peavey 44XT With Adapter
Peavey Driver - 44XT™ Compression 8-Ohms, Titanium Diaphragm, 2-Inch Throat Exit Diameter, Ferrofluid cooled.

Product Applications:
• Installed Ceiling Sound
• Churches
• Meetings and Board Rooms
• Courtrooms
• Auditoriums
• Lecture Halls
• Convention Centers
• Restaurants
• Retail Facilities
• Malls

Features:
• Titanium diaphragm compression driver with 2 inch throat exit diameter.
• Frequency response: 500 Hz - 20 kHz.
• Ferrofluid cooled.
• Impedance: 8 Ohms.
• Adapts from 1.60 inch exit to 2 inch exit.
Specifications:
• Impedance 8 Ohms
• Frequency Response 500 Hz - 20 kHz
• Weight 25 lbs. (Packed) 24.5 lbs. (Unpacked)
• Dimensions (W x H x D) 12" x 8" x 12.25" (Unpacked)

Available in ICONS Music for MYR 1,XXX.00 !

Peavey 14-XT Compressor Driver

Peavey 14-XT Compressor Driver features:
Titanium diaphragm compression driver with 1" throat diameter.
Frequency response: 1kHz - 18kHz.
Impedence: 8 ohms.

For TLS-2X / TLS-5X and TLM-2X / TLM-5X

Get Peavey Compressor Driver 14-XT for only MYR 3XX.00 @ ICONS Music!

Peavey PV-35XO Crossover

The PV35XO is a dual-channel stereo crossover incorporating Peavey's legendary low-noise, low-distortion design. Ruggedly constructed, the PV35XO gives you the flexibility to establish a three-way stereo PA system or run in a four-way and even a five-way mono configuration. The PV35XO has variable state filter controls with 24 dB per octave filters. The PV35XO utilizes XLR inputs and outputs for balanced operation from 20 Hz - 20 kHz.

Peavey PV35XO PA System Crossover Features:
• 3-way stereo operation
• 4-way and 5-way mono operation
• Variable state filter controls
• 24dB/octave LR filters
• Mute capabilities for each output level control
• XLR (balanced input and outputs on each channel, Phase inversion switch on each band-pass output (except low sum)
• Low sum output jack to sum the low frequency, stereo content
• Weight 5
• Width 19
• Depth 6.875
• Height 1.75

Get PV-35XO System Crossover for MYR 1,XXX.00 at ICONS Music

Peavey PV-23XO Crossover

Legendary Peavey performance and reliability.
A two dual-channel crossover incorporating Peavey's legendary low-noise, low-distortion design. The ruggedly contructed PV 23XO gives you the flexibility to manage a two-way stereo system or run in a three-way mono configuration. The PV 23XO has variable-state filter controls with 24dB per octave filters and utilizes XLR inputs and outputs for balanced operation from 20Hz to 20kHz.

Peavey PV 23XO 2-Way Stereo 3-Way Mono Crossover Features:
• 2-way stereo or 3-way mono
• Dedicated 100Hz subwoofer output
• Mute switches
• 24 dB filters and mute switches
• Fully adjustable crossover frequencies and levels
• XLR input and output connectors
• Internal power supply

Peavey PV 23XO 2-Way Stereo 3-Way Mono Crossover Specifications:
Controls and switches
• Channel Gain Control: 0 to +12 dB
• Low Frequency Level Control: -∞ to +6 dB
• High Frequency Level Control: -∞ to +6 dB
• Low Frequency to High Frequency crossover: 100 Hz to 1 Khz x10 range: Changes Low Frequency to Mid Frequency from (100 Hz to 1 kHz) to (1kHz to 10 kHz) 2-way stereo/3-way mono changes the unit from 2-way stereo or 3-way mono

Frequency Response
• Each output is -3 dB at the selected crossover frequency value. Outputs are essentially flat within their relative passbands
• Distortion: Less than 0.02% THD @ +4 dBu,@ 1 kHz
• Hum and Noise: Crossover controls set @ 1 kHz, all level controls set at 0 dB; 22 Hz to 22 kHz, unweighted gain @ 0dB(ref +4dBu) - 90dB
• Low Frequency Output: -86 dBu below 80 dB
• High Frequency Output: -84 dBu below -78 dB
• Maximum Input Level: +14 dBu, (channel gain @ 0 dB input level controls set at 0 dB) +22 dBu
• Maximum Output Level: +22 dBu, unbalanced +28 dBu, balanced
• Input Impedance: 10 k ohms unbalanced

Connectors
• Inputs: XLR Balanced
• Outputs: XLR Balanced
• Power Requirements: 120V AC, 50/60 Hz, 20 watts (domestic model)

Dimensions:
• 19"W x 1.75"H x 5.5"D (Unpacked)

Weight:
• 4 lbs. (Unpacked)


Order now and get it for only MYR 8XX.00 @ ICONS Music.

Peavey Ecoustic 110 EFX Amp

Whether you play acoustic guitar, violin, or harmonica, this is an amp that will give voice to your most expressive playing. 10" Blue Marvel coaxial speaker. 40W biamped power (30W for lows and mids, 10W for highs). 2 channels with independent effects. Chorus, phaser, delay, rotating speaker, reverb, and doubler on channel 1. Chorus, delay, and reverb on channel 2. Semi-programmable with optional footswitch. Feedback Ferret digital anti-feedback system deals with the difficulties of hard-to-EQ instruments and brings out their nuances. CD/AUX input. 2 independent 4-band graphic EQs. Phase switch on channel 1.



Peavey Ecoustic 110 EFX Acoustic Combo Features:
• 10" Blue Marvel coaxial speaker
• Biamped, 30W to the lows and mids, 10W to the highs
• 2 channels with independent effects
• Chorus, phaser, delay, rotating speaker, reverb, and doubler on channel 1
• Chorus, delay, and reverb on channel 2
• Semi-programmable with footswitch (footswitch optional)
• Feedback Ferret digital anti-feedback system
• CD/AUX input
• 2 independent 4-band graphic EQs
• Phase switch on channel 1

Get it for MYR  3,XXX.00 @ ICONS Music